Circle Track

impala spindles and afco drag link.

Item Posts    Sort Order

impala spindles and afco drag link.

33isnum1 33isnum1
I watched NASCAR once | Posts: 1 | Joined: 08/12
Posted: 08/25/12
04:07 PM

I'm currently building a metric malubu street stock . I've been racing dirt an asphalt Street stocks for a long time, but I have always used stock equipment and won races. I want to run impala spindles I have searched around on the internet this forum always comes up but doesn't answer always what I would like for it to. Do Impala spindles correct all of these things bumpsteer, moving roll center and lower ride height? I would like to make this change to get the best bang for my Buck. I have also seen that bump steer in these cars are corrected by using the spindles. I've also seen that Afco has a bumpsteer correction drag link. So i guess my question is, just impala spindles? Just the afco drag link with everything stock (if it is the main purpose of impala spindles )? Or can the spindles and Arco drag link be used together? No one here is running this here to my knowledge. Thanks 33  

pepsi1 pepsi1
I’ve been to a few races | Posts: 72 | Joined: 09/11
Posted: 08/27/12
07:10 AM

Heay 33 I don't think changing the spindles will help your bump steer....what you need to be looking for is the upper and lower control arms.  

golem47 golem47
I watched NASCAR once | Posts: 1 | Joined: 12/13
Posted: 12/20/13
08:08 AM

The thing those spindles give you is bigger bearings and brakes and widen the front track width