Aquapulser Plasma Ignition System

Aquapulser has just released the next generation of plasma ignition systems. The SparkAmp series plasma power module boasts second generation plasma circuitry designed by Aquapulser. It is meant for use on all spark ignited engines with suitable accessories. The pulsed direct current ignition modules discharges an industry leading 200 amps directly across the spark plug, eliminating the inefficiency and limitations caused by impedance mismatchs of conventional systems. These modules generate the largest ignition kernel compared to any conventional OEM or aftermarket performance ignition product available today. The SparkAmp module is compatible with virtually every MSD box and when used together, the total plasma output of the spark measures to a whopping 600 mJ of energy per discharge. Along with our Accessories the SparkAmp can improve practically any engine's performance with plug and play installation in under 15 minutes!

***Aquapulser Spark Amp will allow a skilled tech to tune the engine AFR from 14:1 up to 30:1 without power loss or harmful emissions.***

x80 Spark Amp System
The x80 kits represent uncompromising performance. It has two independent channels that can fire plasma independently, or when the outputs are combined or 'bridged" it can pump a whopping 400 amps of peak power impulse into an ordinary spark - useful if you're igniting water! For high revving race engines, channel 1 can be made to amplify the sparks for the odd firing order cylinders, and channel 2 for the even firing cylinders. This way, the peak power amperage of 200 amps is maintained even at the highest RPMs.
212 Amps unbridged
420 Amps bridged

Todd Miller
R&D Staff, Sales Executive
513-260-1470
mwrep@aquapulser.com