351W with 351C crank sizes??

Hi

Does anyone make a kit to place a 351w crank with 351c bearing sizes.

I an looking for a cast crank kit. factory stock class.
6000rpm.

Crank & bearings + spacers.

:???:  

Are you asking about a kit to place a 351C journal size crank into a 351W block?  Yes it can be done.  Ford Racing makes a spacer kit that goes into the 351W block and sits underneath the 351C size main bearings.  Kit number A-6339-A351.  However...

• Kit reduces 351W main bearing bores to 351C diameter in production 351W or Ford Racing M-6010-A351/B351/A58 cylinder blocks.
• Use with M-6333-A351 main bearings.
• The bearings do not have locating tangs and the spacers do not have tang slots. The bearings are located longitudinally by eye and held in place by crush from the bearing cap/main saddle fit.
• The spacer kit thrust flange width accommodates the Ford Racing M-6303-E351 low cost cast crankshaft. For Ford Racing steel cranks, use Federal Mogul spacer kit # 147MSEMI which has .015" less thrust flange width.
•The spacers must be installed, align bored and plateau honed (Ra 16mu In) to 2.9417" / 2.9425".

 Might be more cost effective to just use the Windsor crank.  Sense your running a stock class and only turning 6000rpm.  

which means I <a href="http://www.losangelesasianescorts.com">Los Angeles escort</a> can't video the singers at my shows, but if a mate of mine records <a href="http://www.losangelesasianescorts.com">Los Angeles escorts</a> it, we're okay???  

on a side note <a href="http://www.losangelesasianescorts.com">Los Angeles asian escort</a> does this mean I can record my singers and give them a copy for their own personal use if I make no profit from it.

Not trying to be <a href="http://www.losangelesasianescorts.com">Los Angeles asian escorts</a> awkward (though I realise i am) just struggling to get a clear idea what is and what isn't allowed.