asphalt late model push in center

have late model race 1/3 mile track less then 10 degrees banking,has push in center of turn,left front and right front  springs are 750,left rear is 175 and right rear is 250,,1 1/8 sway bar corner weights are rf 726,lf 836,rr 558 and lr 772,46% rear and 55.6% left,51.7% cross,conventional setup,camaro clip,and short rear trailing arms,should the cross be closer to the front percentage numbers,and car also has a watts linkage in it,with not very much adjustment,hence the large spring split on rear,am going to put panhard bar in it just trying to finish the season.also have split valve shocks on left front and left rear,not sure what the valving is,had them done by Jr.any help would be great thanks  

check the bump steer and ackerman. Note any rubber build up on the outside LH front tire this would indicate a problem.