rear end slidding out

ok this is my 1st time. But i race at a 1/4 mile track with about 8 degree of banking. my car weights 3600. my front right spring is a 900 and front left. in the rear im running 200. I have 4 inch offset rims and im running 2 degrees of camber and about 5.5 caster. here is the problem, at the track they flip a coin and tell s which way we have to run, so i have to keep the car even. the offse and camber has to say the same because of the rules. I do have a 1 inch sway bar. the car wants to slid out when im trying to leave the turns. Should i add more front spring to get more bit in the rear or what should i do.  

The car i run is 118 inch wheel base. its the rule at the track.  

yea if u learn anything let me kno i run the same track.  

yea if u learn anything let me kno i run the same track.  

This is normal on cars with balanced rear springs. The main thing you can do is to adjust how you drive. When leaving the turns you need to steer toward the outside of the track momentarly. This will help transfer the load from the outside wheel to the inside wheel.  
Go Fast Turn Left..
Taylor Racing Fan Page on Facebook..  http://www.facebook.com/pages/Taylor-Racing/301029283402