|
|
Item Posts
Sort Order
|
|
|
Ignition wires
|
wildcatracer
I watched NASCAR once
| Posts: 3
| Joined: 01/10
Posted: 01/31/10 11:50 AM
|
|
I am buying to many sets of plug wires because the boots down on my plugs are getting burned, they are not touching my exhaust manifolds, as I have to run stock under the plug manifolds for my 350. So I am looking for sugestions on how to solve this problem.
|
|
|
|
|
Posted: 02/03/10 07:09 PM
|
|
I race in the stock class at my local track and have to run the stock manifolds also. I had the same problem. I started using Accel ceramic boot spark plug wires they can not burn. They are a little expensive.
|
|
|
|
waynep7122
I watched NASCAR once
| Posts: 5
| Joined: 11/09
Posted: 02/17/10 12:45 AM
|
|
i don't get over here often...
just curious.. since you have to run stock exhaust manifolds.. do you run stock spark plug wire heat shields that bolt onto the 1/4-20 holes in the block just below the deck surface.. this deflects the infrared heat away from the spark plug wire boots on Millions of stock chevy motors..????
just a thought...
here is a picture of the one type..
http://www.yearone.com/images/parts/7/7529n.jpg
|
|
|
|
|
|
wildcatracer
I watched NASCAR once
| Posts: 3
| Joined: 01/10
Posted: 03/04/10 10:08 PM
|
|
Much thanks for the sugestions. I plan to incorperate the stock heat shields and use a good quality set of wires.
|
|
|
|
|
|
|