|
|
Item Posts
Sort Order
|
|
|
|
1980 mustang
|
mus06
I watched NASCAR once
| Posts: 4
| Joined: 08/09
Posted: 08/01/09
05:48 PM
|
|
i have a 1980 mustang pony car it has a esslinger 2300 in it my questions is at it will start and idle fine but when u give it a little gas it cuts out bad until it gets to about 3500 to 4000 rpm it will clear out i was wondering if it is just the cam it is a 528 soild lift cam
|
|
|
|
RLR-5124
I watched NASCAR once
| Posts: 24
| Joined: 01/09
Posted: 08/03/09
02:52 AM
|
|
it may be getting to much fuel. try leaning it down and or changing the cam on the throttle shaft that operates the acc. pump.
|
|
|
|
PlumCrazy84
I watched NASCAR once
| Posts: 1
| Joined: 09/09
Posted: 09/08/09
11:00 AM
|
|
I had the same problem with mine...and the answer is too much fuel pressure.. the solution I found worked the best is a simple ball valve between the pump and the motor. This is nice cause you can adjust it for track conditions with the simple move of the valve.
|
|
|
|
|
|
crcltrakr
I watched NASCAR once
| Posts: 6
| Joined: 01/10
Posted: 01/02/10
04:46 PM
|
|
You might also try a fuel pressure regulator set to 6#-7.5#.
|
|
|
|
|
|
|