I RUN EARLY EIGHTYS REGAL ON A 1/4 MILE HIGH BANK TRACK WITH A350 MOTOR AND 350 TURBO TRANS WHAT GEAR DO I NEED TO RUN tHANKS
6.33 or a 6.50
kinda depends on the build of the motor and what the rpm range of the cam our street stocks here run 688s to 710
If it is the stock 7.5 rearend, the tallest ring gear that will fit is a 455, if im not mistaken.
I ran a 1/4 in Grand Forks with a 327 engine. That sucker was a rocket turning at 7000 rpm. I ran low gear in a power glide and my final ratio was 6.90.
if your are running 2nd you should run a 355 or 373 rear gear that will guve you a ball park final gear ratio you need
Whether your car uses an automatic or manual transmission, manufacturers have designed a specific set of varying gear ratios in the Cialis Online transmission. Some gears are better suited when moving off from a stop light or up a steep hill, while others work best when cruising along the highway. So, why are different gear ratios needed in cars and how do they work?The majority of modern transmissions are designed with between four to six different gear ratios. These gear ratios are specifically chosen by the manufacturer for the particular engine or style of engine that your car or truck uses.
You see gears in just about everything that has spinning parts. For example, car engines and transmissions contain lots of gears. If you ever open up a VCR and look inside, you will see it is full of gears. Wind-up, grandfather and pendulum clocks contain plenty of Generic Viagra gears, especially if they have bells or chimes. You probably have a power meter on the side of your house, and if it has a see-through cover, you can see that it contains 10 or 15 gears. Gears are everywhere where there are engines and motors producing rotational motion. In this edition of How Stuff Works, you will learn about gears, gear ratios and gear trains so that you can understand what all the different gears you see are doing.Gears are generally used for one of four different reasons: 1. To reverse the direction of rotation 2. To increase or decrease the speed of rotation 3. To move rotational motion to a different axis 4. To keep the rotation of two axis synchronized
Like I said only seems to start this toronto escorts after the car gets good and warm and up to a good running speed, it is not over heating. The car did catch fire recently a couple toronto asian escorts of weeks ago. And this is when this started to happen. Thought I traced toronto escort all the wiring and made sure that nothing was burnt through. toronto asian escort