need handling help/slash motor help - Car Racing Forums at Circle Track Magazine Circle Track
Facebook

need handling help/slash motor help

  
User Name:
Password:
Join FREE Now!
Forgot Password?
Forgot User Name?
Remember Me
PRI Trade Show
Home | Active Posts | Search | Register | Terms | FAQs
Rss
Item Posts    Sort Order

need handling help/slash motor help

 
etch etch
I watched NASCAR once | Posts: 4 | Joined: 10/08
Posted: 10/03/08
09:07 PM

I run a pure stock at kinross speedpark. it is a 1/4 track very smooth i run 1200 rf 1000lf 225 rr 275 lfr car wheighs 3380 with me in it after feature i fixed the loose entry and middle with a little less rear brake and found then i had a loose off prob i run a 82 pontiac grand prix. any help would be greatly apreciated run a low budget team that performs pretty good a little extra help would put me in the winners circle thank you
do etcher #1 garage rats racing  

 
HarleyJimW HarleyJimW
I watched NASCAR once | Posts: 3 | Joined: 03/08
Posted: 10/04/08
08:27 AM

This may or may not help you but I had a similar problem. I was able to fix it by putting a little more cross in the car. Two more pounds of air in the LR and RF. If you are happy with your tire temps and the roll over of your front right tire, try cranking a bit more sway bar in the front, should tighten the car up a bit coming off of the corner.